background image

11

QUICK TROUBLESHOOTING

GAME WILL NOT TAKE OR ADD MONEY CORRECTLY

Micro switch not working or returning properly. Check and repair or replace as necessary.

Game programming set–up incorrectly. Refer to service manual for proper settings.
Bad harnessing or connector. Check w/ohm meter and repair if necessary.
Bad Main P.C. Board. Check and repair or replace as necessary.

START BUTTON WILL NOT FLASH WHEN GAME HAS CREDITS, OR WORK WHEN PUSHED

Micro switch not working properly. Test and replace as necessary.
Micro switch popped out of housing. Snap back into housing.
Burned out light bulb. Replace light bulb.
Bad harnessing or connector. Check w/ohm meter and repair as necessary.
Bad Main P.C. Board. Check and repair or replace as necessary.

GAME HAS NO SOUND

Bad speaker. Check w/ohm meter for 8–ohm load and replace if defective.
Volume level set incorrectly. Check service manual for volume setting procedures.
Bad Harnessing or connector. Check w/ohm meter and repair if necessary.
Bad Main P.C. Board. Check and repair or replace as necessary.
Main P.C. Board fan bad & I.C.’s overheated. Replace fan.

BALLS WILL NOT RELEASE OR WILL NOT STOP RELEASING

Solenoid burned out. Replace solenoid.
Solenoid sticks in. replace solenoid.
Release lever binding. Check, lubricate or replace as necessary.
Release return spring broken. Replace spring.
Bad ball count sensor. Check and replace as necessary.
Bad connector or harnessing. Check w/ohm meter and repair as necessary.
Bad Opto–isolator. Check w/ohm meter and replace if necessary.
Bad Main P.C. Board. Check and repair or replace as necessary.
Debris jamming ball return system. Clean return area.

GAME WILL NOT ADD POINTS CORRECTLY / COUNTS BALLS WHEN NOT THROWN

Bad score sensor. Check and repair or replace.
Score sensor wiring bad. Check w/ohm meter and repair or replace.
Cabinet harnessing bad. Check w/ohm meter and repair or replace as necessary.
Sensors loose or misaligned. Realign sensors.
Main P.C. Board bad. Check and repair or replace as necessary.

TICKET DISPENSER DOES NOT WORK OR WORKS IMPROPERLY

Bad harnessing. Check w/ohm meter and repair if necessary.
Bad ticket dispenser. Repair or replace ticket dispenser.
Dispenser out of tickets. Add tickets.
Bad Main P.C. Board. Check and repair or replace as necessary.
Optical sensor on dispenser dirty. Clean sensor.

SCORE DISPLAY WILL NOT LIGHT OR WORKS IMPROPERLY

No power on Main P.C. Board. Check transformer and fuses / check power module
Bad connectors or harnessing. Check w/ohm meter and repair as necessary.
Bad Display P.C. Board. Repair or replace as necessary.
Bad Main P.C. Board. Repair or replace as necessary.

Содержание Ice Ball



















Отзывы: