background image

INNOVATECH PRODUCTS AND EQUIPMENT CO., INC. 

 

38

 
PERSONAL HYGIENE 
  Minimize breathing vapor, mist or fumes.  Avoid prolonged or repeated contact with skin.  Remove 
contaminated clothing; launder or dry-clean before re-use.  Remove contaminated shoes and thoroughly 
clean before re-use; discard if oil-soaked.  Cleanse skin thoroughly after contact, before breaks and 
meals, and at end of work period.  Product is readily removed from skin by waterless hand cleaners 
followed by washing thoroughly with soap and water. 
 

J.  TRANSPORTATION AND OSHA RELATED LABEL INFORMATION 

 
TRANSPORTATION INCIDENT INFORMATION 
  For further information relative to spills resulting from transportation incidents, refer to latest 
Department of Transportation Emergency Response Guidebook for Hazardous Material Incidents. 
 
U.S. DOT HAZARDOUS MATERIALS SHIPPING DESCRIPTION:  Not Regulated 
 
OSHA REQUIRED LABEL INFORMATION 
  In compliance with hazard and right-to-know requirements, where applicable OSHA Hazard Warnings 
may be found or the label, bill of lading or invoice accompanying this shipment. 
 
Note:  Product label may contain non-OSHA related information also. 
 
The health and safety information presented herein must be used in conjunction with the pertinent 
standards for training, work practices and facilities design established by OSHA, NIOSH, NFFA, API, 
NEC, NSC, UNDERWRITERS, BUREAU OR MINES, and similar organizations. 

 
The information and recommendations contained herein are, to the best of EXXON’s knowledge and 
belief, accurate and reliable as of the date issued.  EXXON does not warrant or guarantee their accuracy 
or reliability, and Exxon shall not be liable for any loss or damage arising out of the use thereof.  
 
The information and recommendations are offered for the user’s consideration and examination, and it is 
the user’s responsibility to satisfy itself that they are suitable and complete for its particular use.  If buyer 
repackages this product and other necessary information is included on the container.  
 
The Environmental Information included under Section H hereof as well as the Hazardous Materials 
Identification System (HMIS) and National Fire Protection Association (NFPA) rating have been included 
by Exxon Company, USA in order to provide additional health and hazard classification information.  The 
ratings recommended are based upon the criteria by the developers of these rating systems, together 
with Exxon’s interpretation of the available data.  

 

Содержание TERMINATOR-2000e



























































Отзывы: