Innovatech TERMINATOR-2000e, Руководство по эксплуатации и обслуживанию

Страница: 35 / 58

INNOVATECH PRODUCTS AND EQUIPMENT CO., INC.
35
EXTINGUISHING MEDIA AND FIRE FIGHTING PROCEDURES
Foam, water spray (fog), dry chemical, carbon dioxide and vaporizing liquid type extinguishing agents
may all be suitable for extinguishing fires involving this type of product, depending on size or potential
size of fire and circumstances related to the situation. Plan fire protection and response strategy through
consultation with local fire protection authorities or appropriate specialists.
The following procedures for this type of product are based on the recommendations in the National
Fire Protection Association’s “Fire Protection Guide on Hazardous Materials.” Tenth Edition (1991).
Use water spray, dry chemical, foam or carbon dioxide to extinguish the fire. Use water to keep fire-
exposed containers cool. If a leak or spill has not ignited, use water spray to disperse the vapors and to
provide protection for persons attempting to stop a leak. Water spray may be used to flush spills away
from exposures. Minimize breathing of gases, vapor, fumes or decomposition products. Use supplies-air
breathing equipment for enclosed or confined spaces or as otherwise needed.
DECOMPOSITION PRODUCTS UNDER FIRE CONDITIONS
Fumes, smoke, carbon monoxide, sulfur oxides, phosphorus oxides, metal oxides, aldehydes and
other decomposition products, in the case of incomplete combustion.
“EMPTY” CONTAINER WARNING
“Empty” containers retain residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE,
CUT, WELD, BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SCCH CONTAINERS TO HEAT, FLAME,
SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND
CAUSE INJURY OR DEATH.
Do not attempt to refill or clean containers since residue is difficult to remove. “Empty” drums should
be completely drained, properly bunged and promptly returned to a drum reconditioner. All other
containers should be disposed of in an environmentally safe manner and in accordance with
governmental regulations.
For work on tanks refer to Occupational Safety and Health Administration regulations, ANSI Z49.1,
and other governmental and industrial references pertaining to cleaning, repairing, welding, or other
contemplated operations.
E. HEALTH AND HAZARD INFORMATION
VARIABILITY AMONG INDIVIDUALS
Health studies have shown that many petroleum hydrocarbons and synthetic lubricants pose potential
human health risks, which may vary from person to person. As a precaution, exposure to liquids, vapors,
mists or fumes should be minimized.
EFFECTS OF OVEREXPOSURE (Signs and symptoms of exposure)
Prolonged or repeated skin contact may cause skin irritation.
NATURE OF HAZARD AND TOXICITY INFORMATION
Repeated and prolonged overexposure to oil mists may result in droplet deposition, oil granuloma
formation, inflammation and increased incidence of infection.