Innova Xtirpa, Инструкция и руководство по безопасности, Страница: 13 / 40

MU8007-012ENEU rev03 13
-5-
XTIRPA SYSTEM DESCRIPTION
WARNING
The XTIRPA system is part of a personal fall arrest, work positioning, personnel handling,
material handling or rescue system for use in confined spaces. The XTIRPA system is
intended to act as a support structure or anchor for these uses. The user must read,
understand and follow the manufacturer’s instructions for each component or part of the
complete XTIRPA system. These instructions must be provided to the user of the XTIRPA
system. The user must read and understand these instructions before using the XTIRPA
system. The manufacturer’s instructions must be followed for proper use and maintenance
of the XTIRPA system. Alterations or misuse of the XTIRPA system or failure to follow
instructions may result in serious injury or death, for which the Manufacturer disclaims all
warranties and liabilities whatsoever, user, owner and purchaser of the XTIRPA system
waiving all claims, rights and recourses against the manufacturer and derived therefrom.
IMPORTANT: It is imperative to respect the mounting compatibilities identified in
chapter 5.
***Only the assemblies shown inside this manual are authorized.***
DESCRIPTIONS: (See illustrations on following page)
- EXTENDABLE COUPLING SYSTEM FOR VEHICLES: IN-2126 / IN-2204 (see illustration 1)
- DAVIT ARM WITH SECONDARY BLOCK 610mm (24”) : IN-2210 (see illustration 2)
- 76MM (3”) MAST FOR DAVIT ARM IN-2210 : IN-2003 (see illustration 3)
- TYPICAL SET: IN-8007 (see illustration 4)
- UNIVERSAL VEHICLE COUPLING JOINT : A2126-07 (see illustration 5)
- 1829MM (72”) EXTENSION FOR VEHICLE COUPLING : A2126-09 (see illustration 6)
- 90º EXTENSION FOR VEHICLE COUPLING: A2126-10 (see illustration 7)
- ADAPTER FOR COUNTERBALANCED TRUCK 51MM-89MM (2”-3.5’’) : A2126-38 (see
illustration 8)
- ANCHORING ADAPTER FOR VEHICLE COUPLING : A2126-21 (see illustration 9)
- C-CLAMP FOR VEHICLE COUPLING : A2126-14/ A2126-33 (see illustration 10)
- COUNTERBALANCED TRUCK : A2305-07 (see illustration 11)
- UNIVERSAL WALL ADAPTER FOR VEHICLE COUPLING : IN-2348 (see illustration 12)
- 90º 8” (213 MM ) UNIVERSAL ADAPTER EXTENSION IN-2348 : A2348-03 (see illustration 13)
- 90º 12” (305MM) UNIVERSAL ADAPTER EXTENSION IN-2348 : A2348-05 (see illustration 14)
- ATTACHMENT BRACKET FOR BEAM 3-3/4’’ MAX. : A2348-08 (see illustration 15)
- REINFORCED REDUCER TUBE 2-1/2’’ TO 2’’ (ACCS.) : A2126-57 (see illustration 16)
- BALLAST SUPPORT ASSEMBLY: A2305-65 (see illustration 17)
- ADAPTATEUR POUR ATTELAGE DE VÉHICULE EUROPÉEN: IN-2517 (see illustration 18)
- EXTENSION 900MM (36”) FOR COUPLING (HITCH) DEVICE FOR MOTOR VEHICULES:
a2126-69 (see illustration 19)
- COUNTERWEIGHT TROLLEY WITH FALL ARREST: IN-2525 (illustration 20)
- COUNTERWEIGHT SUPPORT: a2305-90 (illustration 21)