Innova Xtirpa Скачать руководство пользователя страница 12

MU8007-012ENEU rev03

12

WARRANTY

The XTIRPA system offered by the Manufacturer, INNOVA Public Utility Products Inc., is war

-

ranted against manufacturing defects in workmanship and materials for a period of two (2) years 
from the date of shipment of the product, which warranty only covers the original purchaser of 
the XTIRPA system. The Manufacturer will promptly repair or replace all components or parts 
found to be defective, the Manufacturer reserving the right to elect to have any alleged defective 
part returned to its plant for inspection before making a repair or replacement.
Only components or parts found to be defective by the Manufacturer, at its sole discretion and 
upon any inspection requested and performed by the Manufacturer, will either be repaired or 
replaced by the Manufacturer, at its sole choice.
All claims must be forwarded in writing to the Manufacturer, immediately upon discovery by 
owner, and must be accompanied by a copy of the proof of purchase of the original purchaser. 

Manufacturer  will  issue  a  claim’s  number  and  give  specific  instructions  to  be  followed  as  to 

claim’s procedures and return of the defective part, if so requested by the Manufacturer. Owner 
will collaborate with Manufacturer and its representatives to allow inspection of any alleged 
defective part. All shipping costs to return defective components and parts to the Manufactur-
er’s plant are payable by owner, the cost of reshipping replacement components or parts being 
covered by the Manufacturer.
This warranty does not cover equipment damages resulting from any other cause than a man-
ufacturing defect in workmanship or materials, including, without limitation, damages resulting 
from abuse, lack of maintenance, improper handling or storage, voluntary damages, vandalism, 
accidental damages or damages resulting from impact or collision, damage in transit, damages 

caused  by  fire,  explosion,  chemical,  toxic  or  corrosive  vapors,  substances  or  environments, 

water, normal corrosion and rust, storms, hail, and other acts of God, war insurrection, acts of 
terrorism or other damage beyond the control of the Manufacturer. This warranty applies only 
to the original purchaser and is the only one applicable to the XTIRPA system, and is in lieu of 
all other warranties, expressed or implied. Without limiting the generality of the foregoing, the 
Manufacturer will not be liable nor responsible for any other cost, damages or claims whatsoev-
er, including for any special, incidental, indirect, or consequential damages whatsoever such as, 

but not limited to, damages for loss of profits or expected revenues, for business interruption, for 

personal injury, for failure to meet any duty including of good faith or of reasonable care, for neg-
ligence, and for any other pecuniary or other loss whatsoever, arising out of or in any way related 
to the use of or inability to use the XTIRPA system, even in the event of the fault, tort (including 
negligence), strict liability, breach of contract or breach of warranty, even if the Manufacturer has 
been advised of the possibility of such damages. The Manufacturer hereby disclaims all other 
warranties and conditions, either express, implied or statutory, including, but not limited to, any 

implied warranties or conditions of merchantability, of fitness for a particular purpose or applica

-

tion, and of lack of negligence or lack of workmanlike effort.

IMPORTANT:

 The buyer must fill out and return the Limited Warranty registration form for 

each product.

Содержание Xtirpa









































Отзывы: