Innova Stone Monoblock M1, Руководство по установке, Страница: 14 / 72

14
INSTALLATION
INSTALLATION
2�1 Preliminary warnings
For detailed information on the products, refer to
chapter "Technical information"
p. 56
The installation must be carried out by the installer. There
is a risk of water leakage, electric shock or fire if the instal-
lation is not performed correctly.
During the installation, it is necessary to observe the pre-
cautions mentioned in this manual, and on the labels
placed inside the equipment, as well as to adopt any pre-
caution suggested by common sense and by the Safety
Regulations in force in the place of installation.
Be sure to use the supplied or specified installation parts.
Use of other parts may cause the unit to come to lose,
water leakage, electrical shock, or fire.
Failure to apply the indicated rules may cause malfunc-
tions of the appliances and relieves the manufacturer
from any warranty and from any damage caused to per-
sons, animals or property.
Preliminary warnings for R32
Safety checks must be carried out to ensure that the risk of
combustion is minimised before starting work on systems
containing flammable refrigerants.
The appliance must be protected against accidental im-
pacts to prevent mechanical damage.
Do not puncture or burn.
2�2 Reception
Preliminary warnings
Upon receipt of the package check that it is not damaged,
otherwise accept the goods with reserve, producing pho-
tographic evidence of any damage.
The package must be transported in an upright position;
otherwise, notify the carrier immediately.
In the event of damage, notify the shipper within 3 days
of receipt of any damage by registered mail with return
receipt, submitting photographic evidence. Similar infor-
mation should be sent by fax to the manufacturer (juris-
diction will be at the Court Trento for any dispute).
No notice of damage will be accepted after 3 days from
delivery.
Preliminary warnings for R32
Check if there is refrigerant inside the package using an
electronic leak detector suitable for the system refrigerant.
If it is present, the refrigeration circuit is likely damaged. In
this case, do not install the appliance and call the Techni-
cal Assistance Centre.
Package description
The packaging is made of suitable material and carried out
by experienced personnel.
The appliance is shipped in standard packaging consisting of
a cardboard sleeve and a set of expanded polystyrene pro-
tectors.
There is a pallet underneath the packaging of the unit to fa-
cilitate transport and moving.
Units are delivered complete and in perfect condition.