Additional Tests
PERFORMING SERVICE RESETS
83
For some vehicles, a submenu displays. Select the desired
option, then press
ENTER
. Proceed to step 2.
If SAS calibration is not supported by the vehicle under
test, an “advisory” message displays. Choose
Exit
to
return to the Main Menu.
2.
A “One moment” message displays, followed by one or more
“informational/ instructional” screens.
Perform test procedures as directed. Choose
Next
, as
appropriate, to scroll to the next screen.
3.
For some vehicles, “status” screens display as each phase of the
calibration procedure is successfully completed. Choose
Next
, as
appropriate, to scroll to the next screen.
A “results” screen displays when the calibration procedure has
completed.
4.
Choose
Exit
to return to the Main Menu.
EPB Reset
EPB Reset
procedures vary between vehicle makes and models.
If an error occurs while performing calibration procedures, an
“advisory” message displays. Choose
Exit
to return to the
Main Menu.
1.
Select
EPB Reset
in the Service Reset menu, then press
ENTER
.
A “One moment” message displays.
For some vehicles, one or more submenus display. Select the
desired module and/or option, as appropriate, then press
ENTER
. Proceed to step 2.
If EPB reset is not supported by the vehicle under test, an
“advisory” message displays. Choose
Exit
to return to the
Main Menu.
2.
One or more “informational/instructional” screens display.
Perform test procedures as directed. Choose
Next
, as
appropriate, to scroll to the next screen.
3.
For some vehicles, “status” screens display as each phase of the
calibration procedure is successfully completed. Choose
Next
, as
appropriate, to scroll to the next screen.
A “One moment” message displays while the procedure is in
process.
A “results” screen displays when the calibration procedure has
completed.
If the procedure is stopped due to a communication error,
an “advisory” message displays. Choose
Exit
to return to
the Main Menu.