Additional Tests
SYSTEM/ACTUATOR TESTS
34
If an error occurs while performing any function, an “advisory”
message displays. Choose
Exit
to return to the Special
Functions menu.
Set Throttle Blade Position
1.
Select
Set Throttle Blade Position
in the Special Functions menu,
then press
ENTER
.
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2.
Choose
Yes
to continue.
A “status” screen displays while a vehicle status check is
performed.
The Select Position screen displays.
3.
Select
Normal
,
Closed
,
Open
or the
desired percentage (from
10%
to
90%
),
then press
ENTER
.
The Test Results screen displays.
The screen shows the current
values for
APP 1 Volts
,
APP 2
Volts
,
TPS 1 Volts
,
TPS 2 Volts
,
TPS 3 Volts
,
TPS 4 Volts
,
Throttle
Blade 1 Position
and
Throttle
Blade 2 Position
.
4.
If desired, choose
Reselect
to return to the Select Position screen,
and repeat step 3 to select a new throttle blade position.
5.
Choose
Finish
to return to the Special Functions menu.
Throttle Learn Mode
1.
Select
Throttle Learn Mode
in the Special Functions menu, then
press
ENTER
.
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2.
Choose
Yes
to continue.
A “status” screen displays while a vehicle status check is
performed.
3.
A “confirmation” screen displays when the learn routine begins.
A series of “instructional” screens display while the procedure is
in progress. Perform the following when prompted:
- Press and hold the accelerator pedal.