Additional Tests
SYSTEM/ACTUATOR TESTS
47
1.
Select
Injector Kill System Test
in the Special Functions menu,
then press
ENTER
.
An “instructional” screen displays. Prepare the vehicle for test as
directed.
- Start and idle the engine.
- Make sure engine coolant temperature is 83°C (180°F) before
proceeding.
2.
Choose
Yes
to continue.
A “status” screen displays while a vehicle status check is
performed.
The Select Injector screen displays.
3.
Select the desired injector, then press
ENTER
.
The test results screen displays.
The screen shows the
Injector Kill
Routine Results
and the current
Engine Speed
.
4.
If desired, choose
Reselect
to return to
the Select Injector screen, and repeat
step 3 to select a new fuel injector.
5.
Choose
Finish
to return to the Special
Functions menu.
Injector Kill System Test (002)
The Injector Kill System Test function lets you perform a test of the
injector kill system for a selected fuel injector.
1.
Select
Injector Kill System Test
in the Special Functions menu,
then press
ENTER
.
An “instructional” screen displays. Prepare the vehicle for test as
directed.
- Start and idle the engine.
- Make sure engine coolant temperature is 83°C (180°F) before
proceeding.
2.
Choose
Yes
to continue.
A “status” screen displays while a
vehicle status check is performed.
The Select Injector screen displays.
3.
Select the desired injector, then press
ENTER
.
The test results screen displays.
The screen shows the
Injector Kill Results
, the
Injector
Number
selected, the current
Engine Speed
, and the
Engine
Coolant Temp
.