Live Data Mode
LIVE DATA PLAYBACK
136 3160g
4.
Use the
UP
and
DOWN
buttons,
as necessary, to highlight
Continuous
Playback
or
Frame by Frame
, as desired,
then press the
ENTER
button.
The display shows the recorded
Live Data, beginning with the
"trigger" frame.
Only a limited amount of PID data can be displayed on the
screen at one time. If additional PID data is available, a small
arrow will be shown on the display. Use the
UP
and
DOWN
buttons, as necessary, to scroll up or down to view all
available PID data.
When Live Data is played back, all PIDs selected during
recording setup are shown.
When viewing recorded Live Data, look for any irregularities in any
of the PID values/signal information (LTFT %, RPM, MAP, TEMP,
etc.). If any PIDs are not within specification, or irregularities are
detected, follow the procedures in the vehicle's service repair
manual to perform additional troubleshooting and repair.
5.
When you select
Continuous
Playback
, the Scan Tool plays
recorded data at a rate of one frame /
15 seconds. When playback is finished,
a Playback Complete message displays.
To play the data back again, use the
UP
and
DOWN
buttons, as
necessary, to highlight
Continuous Playback
or
Frame by
Frame
, as desired, then press the
ENTER
button.
To exit Live Data Playback mode and return to Live Data mode,
use the
UP
and
DOWN
buttons, as necessary, to
highlight
Exit Playback
, then press the
ENTER
button.
6.
When
Frame by Frame
is selected, you must scroll the individual
frames manually.
When you have viewed all PID information for the current frame of
Live Data, use the
UP
and
DOWN
buttons, as necessary,
to scroll to the to the end of the PID list. Highlight
Next Frame
or
Previous Frame
, as desired, then press the
ENTER
button.
To exit Live Data Playback mode and return to Live Data mode,
use the
UP
and
DOWN
buttons, as necessary, to
highlight
Exit Playback
, then press
the
ENTER
button.
If there is no Live Data currently
stored in the Scan Tool's memory,
an advisory message shows on the
display. Press the
LD
button to exit
the "Live Data Playback" mode.
