Live Data Mode
RECORDING (CAPTURING) LIVE DATA
134 3160g
- Ensure your vehicle is OBD2 compliant. See VEHICLES
COVERED on page 5 for vehicle compliance verification
information.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press
the
POWER/LINK
button to continue.
3.
Use the
UP
and
DOWN
buttons, as necessary, to highlight
Record Manually
.
The Select PIDs to Record screen
displays.
4.
Use the
UP
and
DOWN
buttons to scroll through the available
PIDs. When a PID you wish to record is
highlighted, press the
ENTER
button
to select it (a “checkmark” will show in
the checkbox to the right of the PID to
confirm your selection). Repeat the
procedure until only the PIDs you want
to record have all been selected.
To deselect a currently selected PID, highlight the PID, then
press the
ENTER
button. The checkmark will be removed
from the checkbox.
To record all PIDs, use the
UP
and
DOWN
buttons, as necessary, to highlight
Record All PIDs
,
the press the
LD
button to continue.
5.
When you are finished making your
selections, press the
LD
button to
continue.
The Record Live Data screen
displays.
Use the
UP
and
DOWN
buttons, as necessary, to highlight
Start Recording
. Put the engine in
the operating condition where the
problem manifests itself.
- If necessary, drive the vehicle
until you reach the vehicle speed
at which the problem occurs.
6.
When the problem occurs, press and
release the
LD
button.
A progress message shows on the display.
