Innoband 8860-C1 Скачать руководство пользователя страница 112

Страница: 112 / 128

Chapter 4: Configuration

111

Configuration of Time Schedule

Edit a Time Slot

Choose any Time Slot (ID 1 to ID 16) to edit, click

Edit.

Note:

The days you have selected will be presented in capital letter. No rule will apply to those days in lower case.

Detailed settings for this Time Slot will be shown (see below).

ID:

This is the time slot ID number.

Name:

A user-defined description to identify this time portfolio.

Day:

The default is set from Monday through Friday.

Start Time:

The default is set at 8:00 AM.

End Time:

The default is set at 18:00 (6:00PM).

Select the

Apply

button to apply your changes.

Delete a Time Slot

Click

Clear

to delete the existing Time profile and set it back to default setting.

Click Edit

Содержание 8860-C1

































































































































Результаты поиска

Содержание 8860-C1

Отзывы:

Похожие инструкции для 8860-C1

Бренды по названию

Популярные бренды

Innoband 8860-C1, Руководство пользователя

Результаты поиска

Содержание 8860-C1

Отзывы:

Похожие инструкции для 8860-C1

Бренды по названию

Популярные бренды