Chapter 4: Configuration
54
Packet Filter – Add TCP/UDP Filter
Rule Name:
Users-defined description to identify this entry or click
to select existing predefined
rules. 32 characters is the maximum length.
Time Schedule:
It is self-defined time period. You may specify a time schedule for your prioritization
policy. For setup and detail, refer to
Time Schedule
section
Source IP Address(es) / Destination IP Address(es):
This is the Address-Filter used to allow or block
traffic to/from particular IP address(es). Selecting the
Subnet Mask
of the IP address range you wish to
allow/block the traffic to or form; set IP address and Subnet Mask to
0.0.0.0
to deactivate the Address-Filter
rule.
Tip:
To block access to and from a single IP address, enter that IP address as the
Host IP Address
and
use a
Host Subnet Mask
of “255.255.255.255”.
Type:
This is the packet protocol type used by the application, select
TCP
,
UDP
or both
TCP/UDP
Source Port:
This Port or Port Range defines the port that can be used by the Remote/WAN to connect to
the application. Default is set from range
0 ~ 65535.
It is recommended that an advanced user configure
this option.
Destination Port:
This is the Port or Port Range that defines the application.
Inbound / Outbound:
Select
Allow
or
Block
the access to the Internet (
“Outbound”
) or from the Internet
(
“Inbound”
).
Click
Apply
button to apply your changes.
Содержание 8860-C1
