8120-B1 User’s Guide
WAN service settings:
Check to enable
NAT
which allows multiple PCs surfing Internet simultaneously
by using the same WAN IP address.
Check to enable
Firewall
.
Check to enable
IGMP Multicast
to avoid multicast packet flooding to other LAN
ports where using IGMP packet to get better efficiency in the Ethernet port is
not necessary.
Check to enable
WAN service
.
Enter
the
Service Name
if you want to change it.
Click
Next
.
The
WAN Setup Summary
page will show up. Please refer to
Figure 21: WAN
Summary, PPPoA or PPPoE Configuration
on page 20 for reference. Click
Save
if
correct or click
Back
to change the configuration.
IP over ATM (IPoA)
Figure 24: WAN Connection, IPoA Configuration
To configure the IP over ATM settings:
Enter
the
WAN IP address
and
WAN Subnet Mask
.
Select
“
Use the following default gateway
” then enter the
gateway IP address
and
Use WAN Interface
where packets will be sent to
.
Select
“
Use the following DNS server addresses
” then enter the IP addresses of
Primary DNS server
and
Secondary DNS server.
Click
Next
.
The
NAT configuration
and
WAN Setup Summary
page will show up. Please refer to
Figure 21: WAN Summary, PPPoA or PPPoE Configuration
on page 20 for reference.
Click
Save
if correct or click
Back
to change the configuration.
22
