background image

8120-B1 User’s Guide 

 

Getting Started with the Web pages 

The device includes a series of Web pages that provide an interface to the software 
installed on the device. It enables you to configure the device settings to meet the 
needs of your network. You can access it through a web browser on a PC connected 
to the device. 

Accessing the Web pages 

To access the web pages, you need the following: 

A laptop or PC connected to the LAN or WLAN port on the device.

 

A web browser installed on the PC. The minimum browser version requirement is 
Internet Explorer v4 or Netscape v4. For best display quality, use the latest version of 
Internet Explorer, Netscape or Mozilla Firefox from any of the LAN computers. Launch 
your web browser, type the default IP address of the device 

http://192.168.1.1

 in the 

web address (or location) box, and press [Enter]. When prompted, enter the default 
username/password: admin/admin to access the configuration web page, if you have 
not yet changed the username and password. Please be informed that username and 
password strings are case-sentitive. 

 

 

Figure 5: Login Page 

 

The Menu comprises of: 

Device Information:

 provides the basic information of the system. It includes sub 

menus: Summary, WAN, Statistics, Route, ARP, and DHCP (shown in router mode). 

 

 

 

 

 

 

 

 

 

 

8

 

Содержание 8120-B1















































































Отзывы: