8120-B1 User’s Guide
Routing
This section shows the IP addresses or address routes for the computers connected
to the gateway to reach different destinations, such as the local network, the gateway,
or the Internet. The Routing feature provides three more setting pages including
Default Gateway, Static Route, and RIP.
Default Gateway
Figure 46: Default Gateway Configuration
Global Settings:
Check
Enable Automatic Assigned Default Gateway
checkbox. This router will
accept the first received default gateway assignment from one of the PPPoA,
PPPoE, or Static IP/DHCP interface. If the checkbox is not checked, enter the
static default gateway AND/OR a WAN interface.
Click
Save/Apply
to save the configuration.
NOTE: If changing the Automatic Assigned Default Gateway from “unselected” to
“selected”, you must reboot the router to get the automatic assigned default gateway
Static Route
Figure 47: Static Route Configuration
38
