INNO View 950M, Руководство пользователя

Страница: 26 / 55

View950M Multi-Scan
INNO Instrument Inc. Page 26 of 55
- Touch marker selection by hand
- Move marker in touch state
- Drag to the desired point and
then release the touch
3.8. C
ALIBRATION
Calibration shall be done to eliminate errors in various environments of equipment. The calibration
method supports two methods, one using the mechanical calibration kit - Open, Short, Load and one
using its electrical calibration kit. After selecting the calibration method, press 'Start' to proceed with
calibration. The menu of VIEW950M Calibration is as below.
- Display Calibration menu
- When clicked, move to upper menu (VIEW950M)
- Enter Calibration progress mode
- Select Calibration kit types (OSL or Electronic Calibration kit)
- Cancel application of Calibration
- Move to the previous menu
Notice
- Calibration procedures are referred in ‘4.1 Calibration Procedure’
3.9. L
IMIT
The VIEW950M is a production-specific device that measures VSWR, and the Limit Line function is
important. In the Limit menu, you can set the main criteria for selecting good products and defects
in the production process. It supports Max, Min, and Single settings, and can change settings for each
screen display. The Limit menu is configured as shown below.