INNO View 950M, Руководство пользователя

Страница: 19 / 55

View950M Multi-Scan
INNO Instrument Inc. Page 19 of 55
- Click the item you want to
change
- Input window appears
- Composed of trace chart and
input number of currently
selected port
4. Change port or item
- Enter a number in the input
window
- Check the input value in the
upper right corner
- Unit selection. Complete input
- Simultaneous setting of all
ports at 'All Port Apply' check
3.4. S
CALE
The horizontal axis of each port trace chart represents the frequency and the vertical axis represents
the amplitude. Scale includes a menu to change the vertical axis amplitude. The range that can be
set depends on the Measure setting. For VSWR, you can set the range from 1 to 65. For Log / Mag,
you can set it from -60dBm to + 60dBm. Scale menu configuration is shown below.
- Indicate Scale menu
- Move to top menu if clicked (VIEW950M)
- Change max value of Display Amplitude of selected port
- Change the min value of Display Amplitude of selected port
- Change Display Amplitude of selected port to appropriate range
- Change Display Amplitude to Full Scale of selected port
- Move to the previous menu
Notice
- Amplitude range that can be set is as follows. (When selecting Full Scale, set to the range below)
VSWR : 1~65
Log/Mag : +60dB ~ -60dB
- The Top value cannot be less than the Bottom, and the Bottom value cannot be greater than the Top.