INNO View 950M, Руководство пользователя

Страница: 21 / 55

View950M Multi-Scan
INNO Instrument Inc. Page 21 of 55
3.5. S
WEEP
In general, the equipment continuously sweeps. However, it is also necessary to sweep once at the
test time according to the necessity of the antenna test. This allows you to set the VIEW950M's
measurement continuity and points related items. The sweep is configured as shown below.
- Display Sweep menu
- If clicked, move to upper menu (VIEW950M)
- Data Point Setting
- Select 1 of 251/501/1001/2001
- Sweep Run or Hold setting function
- 'Hold' display at the top of each trace chart
- Sweep Continuous or Single setting function
- Single 'SING' display on top of each trace chart
- Run / Hold, Cont./Single setting according to All Port setting
- Off: Individual port setting, On: All port setting
- External Trigger setting function
- INT> internal normal operation
- EXT -> operation according to external signal
- When 'EXT' is set, delay time until measurement is set
- External measurement environment stabilization time setting
function
- 0 / 100ms / 150ms / 200ms / 250ms / 300ms
- Move to the previous menu
3.5.1. E
XTERNAL
T
RIGGER
S
ETUP
1. External Trigger setup
- Click 'INT EXT' button to switch
to EXT
- After switching to EXT, press Ext.
Delay is activated and switch
to Single setting
2. External Delay setup