Inmarsat TT-3720A EXPLORER 700, Руководство пользователя

Страница: 71 / 217

Chapter 4: Using the interfaces
98-122988-E Using a phone or fax machine 61
Entering the SIM PIN using a phone
Entering the PIN
If you have a phone connected to the EXPLORER 700, you can use it to enter the PIN at start up, as
an alternative to the keypad.
Do as follows:
Dial the PIN the same way you would dial a phone number:
• For an analog or ISDN phone :
Pick up the phone. When the EXPLORER 700 is waiting for a PIN, you will hear 2 beeps -
pause - 2 beeps - etc.
Dial <
PIN > followed by # .
• For a Bluetooth handset :
Dial < PIN > and press off hook key.
When you hear a “busy” tone or a dialing tone, the PIN has been accepted and you can hang up
or dial a number.
Wrong PIN
If, instead of the busy tone or dialing tone, you continue to hear 2 beeps - pause - 2 beeps - etc., it
means the PIN was wrong. Check that you have the correct PIN and try again.
If a wrong PIN has been entered three times, you will hear 3 beeps - pause - 3 beeps - etc. This
means you have to enter the PUK (PIN Unblocking Key) provided with your SIM card.
After entering the PUK, you must enter a new PIN of your own choice (4 to 8 digits long).
Dial the following:
<PUK> * <New PIN> * <New PIN> followed by # or off-hook key.
Example: If the PUK is 87654321 and the new PIN is 1234, dial
87654321 * 1234 * 1234 followed by # or off-hook key.
If you enter 10 wrong PUKs, the SIM card will no longer be functional. Contact your Airtime
Provider for a new SIM card.