Inmarsat TT-3720A EXPLORER 700, Руководство пользователя

Страница: 61 / 217

Chapter 3: Using the display and keypad
98-122988-E 51
Status information
Status information in the display is normally shown in the lower line of the Main screen.
Examples of status information are:
READY
,
REGISTERING
and
DATA
.
Displaying ongoing transmission
The display shows information on type and duration/MB for calls and data sessions in progress.
• A 64 K Streaming session is displayed as
64K
followed by the duration,
• a CS call is displayed as
CALL
followed by the duration and
• Background data is displayed as
DATA
followed by MB.
Two lines are available in the display. If more than two calls or sessions are active, display of
Streaming data has the highest priority, then CS calls and then Background data. Within these
categories, the oldest calls/data sessions have the highest priority.
Request for action
A request for action, if it is not an alarm, is shown in the lower line of the display. This could be
e.g.
POINT NOW?
or
INSERT SIM
.
When the text is a question, press OK to accept.
What’s next?
This chapter has explained how to navigate in the display menu system and how to use it for basic
setup of the EXPLORER 700.
The following chapter, Using the interfaces, explains in detail how to set up and use each interface
of the EXPLORER 700.
WARNING! When the EXPLORER 700 is powered on, stay clear of the antenna front!
The antenna emits radio frequency energy, not only when a call or data session is in
progress. Always keep a minimum distance of 1 m from the antenna front.