Inmarsat TT-3720A EXPLORER 700, Руководство пользователя

Страница: 154 / 217

Chapter 5: Using the web interface
98-122988-E Administration 144
Loading a configuration from a file
1. In the ADMINISTRATION window, under Configuration, click Load .
2. Click Browse... to browse to the file you want to import. Then click Open .
3. Click Load .
The new configuration is now loaded into your EXPLORER 700.
Logging off administration
If you have not entered anything for 30 minutes under ADMINISTRATION, you are logged off
automatically.
To log off manually, click Logoff under Administrator logoff in the ADMINISTRATION window.
Call charges
If you know the tariff for your subscribed services, you can enter these tariffs in the web interface
and automatically calculate the charges for your calls and data sessions.
Do as follows:
1. From the left navigation pane, select
ADMINISTRATION > Call Charges
2. Select the currency from the Currency drop-down list.
3. Enter the tariff for each of the services.
4. Click Apply .
The entered tariffs are used for estimating the charges for calls and data sessions. The
estimated charge is listed for each call or data session in the call log. For further information,
see Viewing the lists of calls on page 97.
Log handling
1. From the left navigation pane in the ADMINISTRATION window, select Log Handling .
2. To clear the Call log , click OK next to Clear call log? .
3. To clear the total counters , click OK next to Clear total counters? .
This will reset the Time connected counters on the Calls page.
Note
Thrane & Thrane does not take responsibility for the correctness of the estimated
charges. This calculation is only a rough estimate of the charge, based on the tariff
entered by the user. Also, the Airtime Provider may have different methods of calculating
the charge.