Chapter 3: Using the display and keypad
98-122988-E
45
2.
Select one of the following:
•
POINTING
: a sound to indicate the signal level during pointing.
•
MESSAGES
: a sound to indicate that a message has arrived.
•
ALARM
: a sound to indicate that an alarm is present.
3.
Select
ON
or
OFF
to enable or disable the selected audio indicator.
Enabling or disabling interfaces
Each interface (except USB) can be disabled to minimize the power consumption. Specially if the
EXPLORER 700 is battery powered, it is a good idea to disable unused interfaces.
Do as follows:
1.
Select
SETTINGS
>
INTERFACES
.
2.
Select one of the following interfaces:
• PHONE/FAX
• BLUETOOTH
• LAN
• ISDN
• WLAN
3.
Select
ON
or
OFF
to enable or disable the selected interface.
Enabling or disabling stealth mode
When the EXPLORER 700 is in stealth mode, all lights and sounds are turned off. You can still use
the EXPLORER 700, and the display text is readable.
To enable or disable the use of stealth mode, do as follows:
1.
Select
SETTINGS
>
STEALTH MODE
.
2.
Select one of the following:
• ENABLED
•
DISABLED
•
To activate Stealth mode (after enabling Stealth mode), press
C
+
OK
on the keypad.
•
To deactivate Stealth mode, press
C
+
OK
again.
Note
Your user permissions may not allow access to all interfaces. Blocked interfaces are
greyed out.
Note
Enabling stealth mode will
not put the
EXPLORER 700
into stealth mode
, it only enables
the use of stealth mode.
Содержание TT-3720A EXPLORER 700
Страница 1: ...USER MANUAL EXPLORER 700 Thrane Thrane A S info thrane com www thrane com...
Страница 200: ......
