>
Select one of the
Low Power
icons, according to whether you wish to view the low power
status or enable or come out from low power mode
>
Refer to
for how the
Antenna Pointing
and
Get Sat Table
sections
are used
>
Select
Get Signal Strength Filter
, to see which value is set for the signal threshold at
which notifications should be generated
>
If you want to set or amend the threshold value, enter the value into the
Delta
Threshold
field and select
Set Signal Strength Filter
, e.g., if you enter
1
, then
signal strength notifications will be generated if the signal fluctuates by 1 dB or more
from the previous value
>
Select
Get Signal Strength
to see what the current signal strength is for the UT
>
Select
Get Bist
if you want the BRM to run a self-test (Built-In Self-Test (BIST))
>
Select
Get SIM status
if you want to know the current status of the SIM card inserted in the
external SIM card holder on the BRM. If the response is
Success: {“status”: “SIM
PIN”}
, a PIN entry will be required.
Get SIM PIN Status
will return the remaining PIN
retries
>
You can also:
>
Enter the SIM PIN
>
Enter the PIN Unlock Code (PUK)
>
Change the SIM PIN
>
Enable or Disable the SIM Lock Mode
>
Select
Get Product Info
to view the International Mobile Equipment Identifier (IMEI) and
Integrated Circuit Card Identifier (ICCID) of the SIM
>
Select
Get Customer Info
if you want to view the details of the provisioned SIM card
>
Select
Get Usage Statistics
if you want to have an estimation of IP data passing through
all background class contexts, including the Admin Context, on the BRM
>
Select
Get FEM IDs
if you want to know the software (“swrevid”) or hardware (“hwrevid”)
FEM identifiers
>
Select
Get FEM Fields
if you want to see what configurations have been implemented on
the FEM
>
Select
Send FEM Cable Calibration
to obtain the antenna cable calibration values from a
steered antenna back to the FEM
62:
BGAN Radio Module Terminal Development Kit User Guide
Confidential and Proprietary – Inmarsat Global Limited
