10.4: Debug GNSS
This functionality is intended for production test of the GNSS receiver with a specific single satellite
test signal for use by VAMs.
Note:
This functionality only debugs the internal GNSS chipset on the BRM.
To access this functionality, select
Debug GNSS
from the main menu.
The
Debug GNSS
page loads up, per
. It allows you to test, configure, and perform a
restart of the GNSS functionality on the BRM.
Figure 24. Debug GNSS
>
Select
Get GNSS Production Test Message
if you want to see the outcome of a
GNSS Test Message
>
Select either the
GPS
or
Glonass
radio button, according to which constellation of GPS
satellites you want to test the GNSS receiver with
>
Check the
Enable Production Test
check box if you want to enable the BRM to perform a
production test of the GNSS receiver
>
Select either the
GPS
or
Glonass
radio button, according to which constellation of GPS
satellites you want to configure the GNSS receiver with
50:
BGAN Radio Module Terminal Development Kit User Guide
Confidential and Proprietary – Inmarsat Global Limited
