Inmarsat BRM, Руководство пользователя

Страница: 52 / 90

> Temperature (of the BRM and the FEM)
> Location
You can also configure the BRM to report Signal Strength , AT , Message / Messagesends ,
Connection / Secondary Connection / Network -related Websocket notifications, or any Alarm
that may be generated for the UT via Websocket, by checking the relevant check box. These boxes
are unchecked by default.
10.5.1: REST Command Notifications
Local and Remote RESTful commands can be captured in the Notifications page.
As an example, in 10.5 the same REST Commands have been locally generated (through WebUI)
and remotely issued with an identical result at the end, per Table 1 .
Locally Generated REST Commands Remotely Generated REST Commands
Device / Get Admin Connection Enabled GET https://[remote
server]/auth/v1/adminconnection/status
Device / Get Usage Statistics GET https://[remote server]/auth/v1/device/usage_
statistics
Device / Get Signal Strength GET https://[remote
server]/auth/v1/device/signalstrength
Table 1. Locally and Remotely generated REST commands
Figure 26. REST Command Websocket Notifications
10.6: Messaging
To access this functionality, select Messaging from the main menu.
The Messaging page loads up, per 10.6 .
This part of the WebUI allows a user to view or delete all or specific SMS messages, or to compose
and send an SMS message using the BRM, or to check the message storage status.
52:
BGAN Radio Module Terminal Development Kit User Guide
Confidential and Proprietary – Inmarsat Global Limited
inmarsat.com