Installation and programming manual
Table of contents
3
Table of contents
Copyright ............................................................................ 2
European directive compliance ............................................... 2
Table of contents.................................................................. 3
Chapter 1
Overview............................................................................. 5
1.1
Application and use 5
1.2
Other parts of the system 7
1.3
In order to validate the IMQ-SECURITY SYSTEMS certification, and in com-
pliance with EN54-2 regulations: 8
1.4
The SmartLight fire alarm panel models 8
Chapter 2
General information .............................................................. 9
2.1
Documentation supplied 9
2.2
Manual details 9
2.3
Firmware information 9
2.4
Operator qualifications - access levels 9
2.5
Intellectual property rights 9
2.6
Disclaimer 10
2.7
Recommendations 10
2.8
Testing the system 10
2.9
Note to the installer 10
2.10
Technical support 10
2.11
Conventions 10
2.12
Menu paths 11
2.13
Device identifier 12
2.14
Warranty 12
2.15
Safety laws 13
Chapter 3
Device management ........................................................... 14
3.1
Product handling and storage 14
3.2
Environmental conditions 14
3.3
Unpacking the device 14
Chapter 4
Technical description........................................................... 16
4.1
Internal devices 16
4.2
Technical specifications 17
4.3
PCB current draw 17
Chapter 5
User Interface.................................................................... 18
5.1
SmartLight panel frontplate 18
5.2
Internal LEDs 22
5.3
Repeater (optional system enhancement panel) 23
Chapter 6
Installation instructions ....................................................... 26
6.1
Installing the extinguishant module (accessory item) 26
6.2
Wall mounting 26
6.3
Connecting the Loop 27
6.4
Connecting the dialer 28
6.5
Connecting the RS485 BUS 29
6.6
Connecting the fault signaling outputs 30
6.7
Connecting the alarm signaling output 31
6.8
Connecting the extinguishant module (optional) 32
6.9
The AUX output 33
6.10
Connecting the Mains 34
6.11
Connecting the batteries 34
6.12
Thermal Probe 35
Chapter 7
Powering up and configuring the system................................ 37
