INIM Previdia Ultra Скачать руководство пользователя страница 5

Страница: 5 / 76

Installation manual

General information

Chapter 1

General information

1.1

Manufacturer's details

Manufacturer:

INIM ELECTRONICS S.R.L.

Production plant:

Centobuchi, via Dei Lavoratori 10

Municipality:

63076, Monteprandone (AP), Italy

Tel.:

+39 0735 705007

Fax:

+39 0735 704912

E-mail:

[email protected]

Web:

www.inim.biz

The personnel authorized by the manufacturer to repair or replace the parts of this system, hold authorization to work
only on devices marketed under the INIM Electronics brand.

1.2

Supplied Documentation

Previdia Ultra User’s Manual:

contains the identification of the parts on the front plate and the end-user operating

instructions for use.

Previdia Ultra control panel Installation Manual:

contains the technical specifications of the Previdia Ultra control

panels and the mounting, installation and wiring instructions.

Manual for system configuration, commissioning and maintenance:

contains the instructions for system

commissioning and the operations to be carried out during commissioning, maintenance and troubleshooting sessions.

Previdia Ultra Programming Manual:

contains the control panel configuration guide and a detailed description of the

various options contained in the programming software.

Installation manual for internal modules:

contains instructions for installation and the wiring diagrams for the various

IFAM and IFM internal modules (IFAMPSU, IFAMAMP, IFAMEVAC, IFAMIDANET, IFAMFFT, IFM2L, IFMNET, IFM4R, IFM4IO,
IFMDIAL, IFM16IO, IFMLAN, IFMEXT)

Installation manual for FPM modules:

contains instructions for installation and the wiring diagrams for the various

front-plate modules (FPAMIAS, FPMCPU, FPMLED, FPMLEDPRN, FPMEXT, FPMNUL)

Installation manual for accessory modules:

contains instructions for installation and the wiring diagrams for the

various IAS-ADAPT1000 and IAS-ISOL1000 accessory modules

Installation manual for microphone bases:

contains technical specifications and the instructions for use of the

Microphone bases (IPG12, IPG24, IPGE06, IPGE18)

Instructions for the installation of cabinets:

instructions for mounting cabinets and respective accessory components

(PRCAB+, )

Guide to Networking:

manual containing the instructions for the connection of control panels in a network,

IDANet network or via IP, as well as the description of the limitations and responsibilities relating to the use of networks.

BMS Manual:

provides the installer with the guidelines relating to the integration of Previdia control panels with external

supervision systems.

The manuals which are not supplied with the apparatus can be ordered, making reference to their respective codes, or
downloaded from www.inim.biz.

1.3

About this manual

Manual code:

DCMIINE0PREVIDIAU

Revision:

1.00

Содержание Previdia Ultra













































































Результаты поиска

Содержание Previdia Ultra

Отзывы:

Похожие инструкции для Previdia Ultra

Бренды по названию

Популярные бренды

INIM Previdia Ultra, Руководство по установке

Результаты поиска

Содержание Previdia Ultra

Отзывы:

Похожие инструкции для Previdia Ultra

Бренды по названию

Популярные бренды