INIM Electronics Sol Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 40

INIM Electronics Sol Series Скачать руководство пользователя страница 6

6

General information

Anti-intrusion control panels

Chapter

1

General information

1-1

Manufacturer's details

Manufacturer:

INIM ELECTRONICS s.r.l

Production plant: Centobuchi, via Dei Lavoratori 10

63076, Monteprandone (AP), Italy

Tel.:

+39 0735 705007

Fax:

+39 0735 704912

e-mail:

[email protected]

Web:

www.inim.biz

The persons authorized by the manufacturer to repair or replace the parts of this system have

authorization to work only on devices marketed by INIM Electronics.

1-2

Patented technologies

The Sol series of control panels has the following patented technologies.
•

Input/Output Terminals

: each terminal on-board the control panel, keypads and

expansion boards can be configured as either an input or output zone.

•

nBy/X proximity reader

: this reader has been especially designed to flush-mount to all

models of electrical outlet boxes.

•

Learn zone balancing

: under opportune conditions, this option allows the installer to

start the process of automatic learning of the balancing of all the system zones, thus

eliminating the task of entering the value of each zone in separately.

1-3

Manuals

The manuals which are not supplied with the apparatus can be ordered, making reference to

their respective codes, or downloaded from www.inim.biz.

INSTALLATION AND

PROGRAMMING

GUIDE

The guide, supplied with each control panel, provides all the instructions and illustrations

necessary for fast installation and programming of the Sol system.
This leaflet provides step by step descriptions of the procedures required for the system

wiring, the various connections and first power up. It also provides a table for the addressing

of peripherals and a quick guide to programming and the setting up of default values of the

programming parameters.

INSTALLATION

MANUAL

(THIS MANUAL)

The installation manual contains the technical specifications of all the system components and

the instructions for their installation, including instructions and wiring diagrams relating to the

various modules.
It also contains the instructions for system commissioning
In order to provide adequate protection, the installer must adhere to all the manufacturer's

guidelines relating to the active and passive security devices of this system.

PROGRAMMING

MANUAL

The Programming manual contains instructions for the configuration and programming of the

Sol system, as well as the descriptions of all the parameters and options, regardless of the

means chosen for the programming process (keypad, software, etc.).

«
...
4
5
6
7
8
...
»

Содержание Sol Series









































Отзывы:

Нет отзывов