INIM Electronics SmartLevel Series, Инструкция по установке и программированию

Страница: 9 / 20

Device description 9
Installation and programming manual
•• T8 , output that will signal faults on the power-supply module of the
SmartLevel power-supply station
•• T9 , output that will signal the loss of communìcation between the
LIVPWR100 board and the power-supply unit or between the SmartLevel
motherboard and the LIVPWR100 board
• T10 , output that will be activated in the event of the total loss of operating
capacity of the SmartLevel motherboard
2-3
Description and technical
specifications
Note
Use of the +AUX terminals on the mother board (IN088) annuls I&HAS grade 3
compliance.
Table 1: Technical specifications
Model SPS12060XG3 SPS12160XG3
PS type A
Power supply voltage
230V~ (-15% + 10%)
50/60Hz
Maximum current draw 230V~ 0.5A 1.1A
Output voltage
nominal 13.8V
range from 9.5 to 15V
maximum ripple 1%
Maximum current draw of the
boards
mother board (IN088) 65mA @ 13.8V
LIVPWR100 board (IN140) 35mA @ 13.8V
Maximum deliverable current
for external loads
security grade 2 system
(12 hour autonomy)
500mA 1.35A
security grade 3 system
(30 hour autonomy)
130mA 450mA
Maximum deliverable current
on each +AUX terminal
mother board (IN088) 1.35A
LIVPWR100 board (IN140) 2A
Threshold for overload protection 15.4V
SD low voltage 11V
Fault voltage on power outputs 9.8V
Threshold for deep discharge protection 9.5V
Battery maximum internal resistance (Ri max) 2.7Ohm 1Ohm
Battery specifications
Type
YUASA NP-12 FR or similar with case flame class
UL94-V2 or higher
Rated voltage 12V
Maximum capacity 7Ah 17Ah
Maximum recharge time 24h (80% charged)
Internal fuse of switching power supply module (non-replaceable) T 3.15A 250V
Dimensions (W x H x D) 215 x 305 x 85mm 375 x 510 x 85mm
Weight (without battery) 2.2 Kg 5.3 Kg
Operating environmental
conditions
Temperature from -10°C to +55°C
Relative humidity ” 93%, without condensation
Enclosure protection class (EN 60529) IP30
Isolation class(EN 60950-1) I
Safety grade (EN 50131-6) 3
Environmental class (EN 50130-5) II