INIM Electronics SmartLevel Series, Инструкция по установке и программированию

Страница: 15 / 20

Using the device 15
Installation and programming manual
Chapter 4
USING THE DEVICE
4-1
Powering devices
Connect the devices to be powered to the ancillary power outputs AUXx of the
power supply station.
If the SmartLevel station is used to power the devices of an installation with grade
2 or lower security rating, the AUXx outputs on the motherboard must be used
( table 4 "Mother board - terminal board" ).
If the SmartLevel station is used to power the devices of an installation with grade
3 security rating, the AUXx outputs on the LIVPWR100 board must be used ( table
5 "LIVPWR100 board - terminal board" ).
If the SmartLevel is used to power the peripherals connected to the I-BUS of the
SmartLiving intrusion control panel, the connection must be completed as follows:
If an isolator is required on the I-BUS line ( IB100RU or IB100RP ) between the
control panel and the power-supply station, the connection must be completed as
follows:
SmartLiving
control panel
I-BUS terminals
SmartLevel
power-supply
station
ancillary output
terminal