32
700-398-01J X-Series User Manual Issued for version 2.8x
Set Remote Receiver Relay Pulse Time
Use the following steps to set the Remote Receiver relay pulse time.
[*] [Master Code] [*] [2] [5] [Receiver Number] [*] [Relay Pulse Time] [*] [#]
LCD Keypad
1.
Hold the [*] key until the beep (3-4 seconds).
2.
The keypad displays “Master Code + *”.
3.
Enter [MASTER CODE] followed by the [*] key.
4.
The keypad displays “Option Menu”, “Add User Code”.
5.
Enter [2] [5] followed by the [*] key.
6.
The keypad displays “Receiver Num + *”.
7.
Enter [RECEIVER NUMBER], which could be 1, 2, 3, or 4, followed by the [*] key.
8.
The keypad displays “Remote Receivr N”, “R MM:SS”.
9.
Enter [RELAY PULSE TIME] followed by the [*] key.
10.
The keypad displays “R time”.
11.
Once you have finished, press the [#] key to exit programming.
LED Keypad
1.
Hold the [*] key until the beep (3-4 seconds).
2.
The READY and ARM LEDs flash alternately.
3.
Enter [MASTER CODE] followed by the [*] key.
4.
The READY LED flashes.
5.
Enter [2] [5] followed by the [*] key.
6.
The READY and ARM LEDs flash simultaneously.
7.
Enter [RECEIVER NUMBER], which could be 1, 2, 3, or 4, followed by the [*] key.
8.
The READY LED comes on.
Time is displayed in BCD format, but is entered as 4 consecutive digits as per usual. There are four zone LEDs
for every digit:
Zone LED
Time
Zone LED
Time
1
(x 1 = 1)
9
(x 1 = 0)
2
(x 2 = 0)
10
(x 2 = 2)
3
(x 4 = 4)
11
(x 4 = 4)
Mm:Ss
4
(x 8 = 0)
12
(x 8 = 0)
= 45:36
5
(x 1 = 0)
13
(x 1 = 1)
M = LEDs 8 through 5
6
(x 2 = 0)
14
(x 2 = 2)
m = LEDs 4 through 1
7
(x 4 = 4)
15
(x 4 = 0)
S = LEDs 16 through 13
8
(x 8 = 0)
16
(x 8 = 0)
s = LEDs 12 through 9
EXAMPLE:
To get your first minute you add up the values of LEDs 8-5. From the Table above, you will see that LED 7 is on –
giving you an answer of 4. For your second minute, look at the values for LEDs 4-1. LEDs 1 and 3 are on which is
a combined value of 5. For the first second we will look at LEDs 16-13. LEDs 13+14 are on, which equals 3. For
our last second look at LEDs 9 through 12. The added values of LEDs 10+11 is 6. Add this all together and we get
45:36 as our time.
9.
Enter [RELAY PULSE TIME], which is MMSS, followed by the [*] key.
10.
The READY LED is on if viewing relay 1, and the ARM LED is on if viewing relay 2.
11.
Once you have finished, press the [#] key to exit programming.
Содержание IDS X Series
Страница 1: ......
Страница 2: ...2 700 398 01J X Series User Manual Issued for version 2 8x ...
Страница 51: ...51 700 398 01J X Series User Manual Issued for version 2 8x ...
