manualshive.com logo in svg

Inhep Digital Security IDS X Series, Руководство пользователя

Поделиться
Скачать
Inhep Digital Security IDS X Series Скачать руководство пользователя страница 21

 

21 

700-398-01J X-Series User Manual Issued for version 2.8x 

Table 6: User Code Properties 

Zone LED 

Property 

 

Zone LED 

Property 

1 

Master User Code 

 

5 

Disarm Only Code 

2 

Duress Code 

 

6 

Global Arm/Disarm  Code 

3 

Arm to Disarm Code [Maid’s Code] 

 

7 

Programmable Output Code 

4 

Arm Only Code 

 

8 

Voice Dial in enable  

LCD Keypad 

[*] [MASTER CODE] [*] [1] [0] [*] [USER CODE/SLOT] [*] [PROPERTY NUMBER] [*] [*] [#] 

1.  Enter the User Program Mode as per steps 1 - 4 of section Error! Reference source not found. 
2.  The LCD display reads ‘Option Menu’, ‘Add User Code’.  
3.  To select menu option 10 – ‘Code Properties’, press the [1] [0] keys or alternatively use the [PANIC] or 

[MED] keys to scroll through the list of programmable options until you reach the option you want. 

4.  Press the [*] key. 
5.  The LCD display reads ‘User Code/Slot + *’. 
6.  Enter the [USER CODE] or [Slot Number] followed by the [*] key. 
7.  Enter the [PROPERTY NUMBER] followed by the [*] key, or use the [PANIC] or [MED] keys to scroll 

through the User Options that can be assigned to a user. 

8.  Pressing the [*] key toggles between [Y] and [N] for the selected user option. 
9.  Press the [#] key twice to exit User Program Mode. 
EXAMPLE:  
To enable a User Code to function as a duress code, when prompted for the option press [2] [*]. 

Mas te r Us e r                                                             

When assigned to a user, this property allows the user to act as a Master User. Master User Code has full 
access to programming all the user options. 

D ure ss  Code                                                   

This is a special 4 (default) or 6-digit user code (check the code length with your installer) and should only be 
used in the unique situation where an intruder forces one to disarm the system "under duress". 
When the [DURESS CODE] is entered, the control panel disarms normally - however a DURESS REPORTING 
CODE is transmitted to the monitoring company to inform them that you have been forced to disarm the alarm 
by an intruder. 
It is advisable to choose a code that can easily be remembered by all family (or staff) members. 

Arm  to D isarm  Code  [Maid's  Code ]                                                                   

This property may be used to limit access to the premises. A maid's code will only disarm the system if the 
same code was used for arming. If armed with a code other than this code, the system will view an attempt to 
disarm using a maid's code as an invalid entry. Any valid user code will disarm the system if it has been armed 
with a maid’s code. 

Arm  Only Code                                                           

This code will arm the partition that it is assigned. If the partition is disarmed, entering an arm code will arm 
the assigned partition 

D is ar m  Only Code  

This code will disarm the partition it is assigned. If the partition is armed, entering the code will disarm the 
assigned partition.  

Global Arm/ D is arm Code                                             

When there is more than one partition, and all are disarmed, entering a global code will arm all partitions that 
are ready to arm. If all partitions are armed then entering a global code will disarm all partitions. Where some 
partitions are armed and other partitions are disarmed then entering a global code at the keypad of an armed 
partition will disarm all partitions. Similarly, entering a global code at the keypad of a disarmed partition will 
arm all partitions, if they are ready to arm. A remote transmitter programmed with a global code will arm all 
disarmed partitions when the arm/disarm button is pressed, if they are ready to arm. 
NOTE: A partition that is not ready to arm, for instance one with a zone violation, will NOT arm with the global 
arm/disarm code. 
 

 

Содержание IDS X Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды