Ingeteam GB132-C1, Инструкция по установке и эксплуатации

Страница: 29 / 72

29
Operation Ingeteam
ABA2013IQM01_ - Installation and usage manual
EN
IT
Types of charge
The recharging station has two charge modes: nominal ( N ) and limited ( L ).
Selecting the nominal charge process the station will carry out the charge with its nominal current.
Limited charge type charges at 10 A for the 16 A nominal current model, or at 20 A for the 32 A nominal current
model, whereby the charge process is longer.
Starting the charge process
1. Insert the key in the side of the station and select the type of charge required. To select nominal charge,
turn the key clockwise to the N position. Conversely, if you require a limited charge to be carried out, turn the
key clockwise to the L position. The key can be left in the slot or it can be removed as required by the user.
Removing the key ensures that the charge process selection is not modified by third parties.
The front LEDs flash yellow when waiting for a vehicle to be connected.
It is possible to change the type of charge during the charging process by turning the key to the required
position.
2. Connect the vehicle to the recharging station.
Ending the charge process
To finish the charge cycle insert the key and turn it to the 0 position. The front LEDs flash yellow when waiting for
a vehicle to be disconnected. Remove the connector from the vehicle.
9.3. Languages (INGEREV GARAGE)
The information of each user session is displayed in the language configured on each card, regardless of the
default language configured in the station.
The station operator can change the configured default language of the station using a Master card.
In the case of users with no language configured, the station displays the information in the default language set.
9.4. Incidents/Alarms
The incident can be caused by different reasons. The recharging station switches to incident status. In INGEREV
GARAGE the reason for stoppage is shown on the display.