Ingeteam GB132-C1, Инструкция по установке и эксплуатации

Страница: 27 / 72

27
Operation Ingeteam
ABA2013IQM01_ - Installation and usage manual
EN
IT
Ending the charge process
6. To finish the charge cycle identify the card using the reader. The station interrupts the electrical supply
and unlocks the type 2 connector in the event that it has been used.
7. Pull out the connector
The station will return to the awaiting vehicle status.
Deferred charge
For paired charge points the option to defer the charge process is possible. In order to be able to select this type of
charge the station must have the deferred charge option enabled.
The time selected to start the charge process can be adjusted afterwards by the user.
The charge process is the same as the immediate charge , differing in the following points:
Starting the charge process
1. Check that the station is in the awaiting vehicle status, showing the following two screens alternately:
2. Press to access the language selection menu for the charging session. Once the charging process ends
the default language of the station will be enabled.
LANGUAGE
ENGLISH
LANGUAGE
ENGLISH
After accessing the language selection menu browse
through the options by pressing
or .
Select the required language and press .
3. Identify the card using the reader under the display. When the station reads the card correctly a menu will
be displayed to select the charging process or to cancel the process.
SELECT OPTION
DEFERRED CHARGE
SELECT OPTION
DEFERRED CHARGE
To browse through the different options, press the
buttons
or .
When the deferred charge option is highlighted, press
.