Ingeteam GB132-C1, Инструкция по установке и эксплуатации

Страница: 16 / 72

16
Installing and connecting the unit Ingeteam
ABA2013IQM01_ - Installation and usage manual
3. Screw the bottom cover onto the unit and tighten the packing glands in order to correctly secure the
cable.
When the recharging station has been charging for two seconds its LEDs light up. After briefly verifying its status,
the light will switch to green and the display will show an electric vehicle and the current time. The station is ready
and awaits identification from the user in order to begin recharging.
If the station identifies any operating anomaly, the light turns red and the type of incident is shown on the display
(see section
“9. Operation” ).
7.3. INGEREV GARAGE Basic
7.3.1. Installing the unit
1. A perfect-scale paper template will be supplied with the unit, which can be used to situate the holes in
the wall necessary to attach the unit. Once you have marked the points on the wall, proceed with drilling the
holes.
2. In order to mount the unit, it is necessary to install a support on the wall using three fastening elements.
After carrying out this operation, hang the unit from the support.