Ingeteam GB132-C1, Инструкция по установке и эксплуатации

Страница: 20 / 72

20
Communication accessories Ingeteam
ABA2013IQM01_ - Installation and usage manual
8. Communication accessories
INGEREV GARAGE recharging stations have a local RS-485 data bus with an RJ45 connector that enable
interconnection between the stations. Configuration and monitoring of all stations is carried out using the
INGECON SUN Manager software provided by Ingeteam.
All the recharging stations can be accessed both locally or remotely, using - for the latter - an external modem of
the installation or the modem supplied with the communications card if requested upon placing the order.
This section explains the wiring process for local connection, whereby this type of connection is available as
standard (except for INGEREV GARAGE Basic).
In order to install and operate the communication accessories that enable remote communication,
see the
Communication Accessory Manual for INGEREV recharging stations .
For INGEREV GARAGE Basic stations local communication is explained in the Communication Accessory Manual
for INGEREV recharging stations , as this must be installed for the stations to be able to communicate.
8.1. Local communication
INGEREV GARAGE
Follow the instructions below to complete the local connection.
1. Take out the cable that joins the external connector (RJ45) of the recharging station to its control card.
Connect the communication ring.
First station Final station Intermediate station
2. The jumper of the control cards must be removed in all the intermediate stations of the communication
ring.