Ingeteam AAX0057, Руководство пользователя

Страница: 32 / 114

The J5 connector of the AAX0041 card allows for the connection to the bus RS-485 between devices.
Pin Signal
1 RS-485 B (+)
2 RS-485 A (-)
3 Protection shield*
4 GND
* Terminal to facilitate the connection.
The jumper JP1 of the card AAX0041 enables the connection of the end of line resistor in the RS-485 bus. The
jumper JP1 must be closed in the two units considered as end of line of the RS-485 bus.
Consult the accessories manual for communication via RS-485 for more information on the RS-485
wiring.
AAX0058
A (RS-485)
B (RS-485)
D (power)
C
Ethernet
J4 (switch)
J2 (switch)
AAX0058
A and B connectors allow the connection of two independent RS-485 buses.
A and B connectors
Pin Signal
1 RS-485 B (+)
2 RS-485 A (-)
3 Protection shield*
4 GND
* Terminal to facilitate the connection.
In order to power the card you must apply 7
~
42 Vdc on pins 3 and 4 of connector D.
D connector
Pin Signal
1 Not used
2 Not used
3 (-)
4 (+)
32
Communication accessories Ingeteam
AAX2023IQM02_A - User manual