2.0 FOREWORD
2
IRN37–160K–CC & IRN50–200H–CC & IRN75–160K–2S & IRN100–200H–2S
Machine models represented in this manual may be
used in various locations worldwide. Machines sold and
shipped into European community countries requires
that the machine display the EC Mark and conform to
various directives. In such cases, the design
specification of this machine has been certified as
complying with EC directives. Any modification to any
part is absolutely prohibited and would result in the CE
certification and marking being rendered invalid.
The contents of this manual are considered to be
proprietary and confidential to Ingersoll–Rand and
should not be reproduced without the prior written
permission of Ingersoll–Rand.
Nothing contained in this document is intended to
extend any promise, warranty or representation,
expressed or implied, regarding the Ingersoll–Rand
products described herein. Any such warranties or
other terms and conditions of sale of products shall be
in accordance with the standard terms and conditions
of sale for such products, which are available upon
request.
This manual contains instructions and technical data to
cover all routine operation and scheduled maintenance
tasks by operation and maintenance staff. Major
overhauls are outside the scope of this manual and
should be referred to an authorized Ingersoll–Rand
service department.
All components, accessories, pipes and connectors
added to the compressed air system should be:
. of good quality, procured from a reputable
manufacturer and, wherever possible, be of a type
approved by Ingersoll–Rand.
. clearly rated for a pressure at least equal to the
machine maximum allowable working pressure.
. compatible with the compressor lubricant/coolant.
. accompanied with instructions for safe installation,
operation and maintenance.
Ingersoll–Rand reserves the right to make changes and
improvements to products without notice and without
incurring any obligation to make such changes or add
such improvements to products sold previously.
Details of approved equipment are available from
Ingersoll–Rand Service departments.
This machine has been designed and supplied for use
only in the following specified conditions and
applications:
. Compression of normal ambient air containing no
known or detectable additional gases, vapors or
particles
. Operation within the ambient temperature range
specified in the GENERAL INFORMATION section of
this manual.
IF IN DOUBT CONSULT SUPERVISION
.
The company accepts no responsibility for errors in
translation of this manual from the original English
version.
The design of this Compressor package and
certain features within it are covered by patents
held by Ingersoll–Rand and patents pending
SSR ULTRA COOLANT is a registered trademark of
Ingersoll–Rand Company USA.
INTELLISYS is a registered trademark of
Ingersoll–Rand Company USA.
HPM
T
, HYBRID PERMANENT MAGNET
T
and HPM
Logo are trade marks registered by MOTEURS LE-
ROY–SOMER
COPYRIGHT
2003
INGERSOLL–RAND COMPANY
