Ingersoll-Rand Nirvana IRN100-200H-2S Скачать руководство пользователя

Страница: 17 / 85

5.0 SAFETY

IRN37–160K–CC & IRN50–200H–CC & IRN75–160K–2S & IRN100–200H–2S

WARNING – Do not undertake any

maintenance on this machine

until the electrical supply is

disconnected and the air pressure

is totally relieved.

WARNING – Consult the

Operation and Maintenance

manual before commencing any

maintenance.

WARNING – For operating

temperature below 0

C, consult

the Operation and Maintenance

manual.

Read the Operation and

Maintenance manual before

operation or maintenance of this

machine is undertaken.

Do not stack.

Do not operate the machine without

the guard being in place.

Do not stand on any service valve or

other parts of the pressure system.

Do not operate with the doors or

enclosure open.

Do not use fork lift truck from this

side.

Do not breathe the compressed air

from this machine.

No naked lights.

Do not open the service valve before

the air hose is attached.

Содержание Nirvana IRN100-200H-2S






















































































Результаты поиска

Содержание Nirvana IRN100-200H-2S

Отзывы:

Похожие инструкции для Nirvana IRN100-200H-2S

Бренды по названию

Популярные бренды

Ingersoll-Rand Nirvana IRN100-200H-2S, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Nirvana IRN100-200H-2S

Отзывы:

Похожие инструкции для Nirvana IRN100-200H-2S

Бренды по названию

Популярные бренды