Intégration Guide_iUC150&iUC180
62/70
Copyright © 2012 Ingenico
900009816 R11 000 01/1223
All rights reserved
7 MAINTENANCE
7.1 CONFIGURATION
The iUC180 & iUC150 supplied to you has operational configuration loaded.
In factory, software is loaded in the iUC180 & iUC150, as well as parameter definition
files.
For iUC180:
The parameter definition file of the UCMC component is used, in particular, to
determine the type of printer used (local/host) and the position of the host (COMx).
To change configuration, you must load a new parameter definition file (supplied by
Ingenico).
This operation can be performed using the LLT or a USB key (see § Loading by USB
key)
For more information concerning configuration, contact Ingenico Technical Support.
7.2 OPERATING LIFE
Minimum operating life of 5 years.
8 CLEANING INSTRUCTIONS
The external front face of the contactless reader should be carefully cleaned on a
regular basis.
First of all, unplug all the wires from the terminal during this operation.
Good rules for proper cleaning of the terminal are:
•
Use a soft cloth that is very slightly soaked with soapy water to clean the
outside of the terminal.
•
The glass has special surface treatment but must be carefully clean.
•
Do not clean the electrical connections.
•
Do not use in any case, solvents, detergents or abrasive products:
Those materials might damage the plastic or electrical contacts.
•
Avoid also the use of pressurized liquids.
•
Avoid exposing the terminal to the direct rays of the sun.
