Intégration Guide_iUC150&iUC180
56/70
Copyright © 2012 Ingenico
900009816 R11 000 01/1223
All rights reserved
5 INSTALLATION PROCEDURE IN KIOSKS
Note: It is required to use
ESD-protective clothing
while handling these devices.
5.1 KIOSK MECHANICAL REQUIREMENTS
The kiosk panel can be metallic or plastic.
The kiosk panel can be coated with painting but grounding of iUN modules must be
insured.
The kiosk panel thickness must be between 2 mm and 5 mm. This is very important
for Contactless performance.
With a metallic kiosk panel more than 5mm thick or with
metal parts near the antenna, the performance may not be
correct.
5.2 GENERAL INSTALLATION RECOMMENDATIONS
Installation requirements:
•
Ensure that you have enough free space for installation, operational and
maintenance needs.
•
Be aware of the safety regulations.
•
Carefully consider the general and local payment security requirements and
any impact they may have on the kiosk.
•
Carefully consider the ergonomic aspects and also the local acts or
recommendations concerning disabled and visually impaired people.
•
See environmental specification and especially in case of very cold or humid
weather, take steps to ensure that the internal temperature is at least -20 °C.
Metallic front
plane
Plastic or metallic kiosk
plane
Metallic part should not
exceed corner marks
