Intégration Guide_iUC150&iUC180
49/70
Copyright © 2012 Ingenico
900009816 R11 000 01/1223
All rights reserved
Properties
The properties function is used to obtain the following information:
•
List of applications loaded in terminal, version number, checksum, etc. The
application manager gives this information for itself and for the operating
system.
•
Application call time: remote collection, loading, etc.
•
Total number of transactions in each application file contained in system unit.
Download
The downloading function uses the information supplied on initialization of the
application manager.
The program update function is used to update the system unit by:
•
Using a special local loading tool connected to the terminal,
•
Using a remote loading tool,
•
Using a USB key.
The iUC180 must be in maintenance mode with a USB key
containing the software to load plugged in. Then, launch the download by
using the manager menu
Diagnostics
The diagnostics function is used for:
•
Local diagnostics
The operator can request the incidents or alarms stored in the terminal.
The storage function implements two sets of elements:
o
Incident counters: Used for « repetitive » incidents, for which only the
number of occurrences is significant. For example, number of power on.
o
Events: Exceptional in nature. The information content depends on the
type of incident. Generally, this comprises the date, time and
information relative to the incident itself. The events are stored in a
rotating file where the most recent events are kept.
•
Remote diagnostics
This function is used by the operator to trigger a call to a server to dump the
information stored in the terminal. The server thus enriches a database by
which it can efficiently monitor a terminal population, or propose services such
as preventive maintenance, operating statistics, etc.
•
Diagnostics by USB key (iUC180 only)
Diagnostic files are copied to a USB key if present at start-up.
