Installation / Assembly
T-Rack
®
3.0 Series
– Assembly Instructions 1.1(2019-03) E inge
Page 52 of 84
© inge GmbH
Step
Activity
Figure
3
Connect the upper T pieces of modules 1 and 2
Number of persons: 3
a)
Continue holding modules 1 and 2 in position to prevent
tipping.
b)
Carefully move module 2 to module 1.
c)
At the connection of module 1, pull the gasket over the
connection of module 2 so that it is centered between the
grooves of both connections.
d)
Place a flexible coupling 6” half-shell around the gasket.
Ensure that the contact surfaces of the coupling half-shells
are resting in the provided grooves.
e)
Place the second flexible coupling 6” half-shell on the first
and insert the two bolts in the openings.
f)
Tighten the flexib
le coupling 6” with two nuts M12 and
washers using an open-end or box wrench (size 19) until
the contact surfaces of both coupling halves are flush and
resting against each other without a gap.
Ensure that the nuts are tightened evenly and alternately.
Ensure that the square screw neck of each screw is
correctly positioned in each threaded hole.
