Inge T-Rack 3.0 Series Скачать руководство пользователя страница 13

Страница: 13 / 84

Safety

T-Rack

3.0 Series

– Assembly Instructions 1.1(2019-03) E inge

Page 13 of 84

2.6.2

Warning Symbols

The following warning symbols are used in this manual:

WARNING

SYMBOL

DESCRIPTION

GENERAL DANGER SIGN

If the necessary safety instructions are not followed, this may lead
to death, serious injury and serious property damage.

SUSPENDED LOADS

If the necessary safety instructions are not followed, this may lead
to death, serious injury and property damage due to falling loads.

HEAVY WEIGHTS

If the necessary safety instructions are not followed, this may lead
to serious back injury due to lifting of heavy loads.

DANGER OF CRUSHING (BODY)

If the necessary safety instructions are not followed, this may lead
to death or serious injury due to pinching/crushing of the body.

DANGER OF CRUSHING (BODY)

If the necessary safety instructions are not followed, this may lead
to death or serious injury due to pinching/crushing of the body.

DANGER OF CRUSHING AND SHEARING (HAND)

If the necessary safety instructions are not followed, this may lead
to serious injury and property damage due to crushing and shearing
of the hands and other parts of the body.

DANGER OF FALLING

If the necessary safety instructions are not followed, this may lead
to death or serious injury from falling.

DANGER OF SLIPPING

If the necessary safety instructions are not followed, this may lead
to serious injury from slipping.

DANGER OF TRIPPING

If the necessary safety instructions are not followed, this may lead
to serious injury from tripping.

DANGER OF CUTTING

If the necessary safety instructions are not followed, this may lead
to serious injury from cutting on sharp edges.

Содержание T-Rack 3.0 Series





















































































Результаты поиска

Содержание T-Rack 3.0 Series

Отзывы:

Похожие инструкции для T-Rack 3.0 Series

Бренды по названию

Популярные бренды

Inge T-Rack 3.0 Series, Руководство по сборке

Результаты поиска

Содержание T-Rack 3.0 Series

Отзывы:

Похожие инструкции для T-Rack 3.0 Series

Бренды по названию

Популярные бренды