InfRec Thermo Gear G100, Руководство по эксплуатации

Страница: 90 / 141

Chapter 4 Advanced
◎
CAL – EMISSIVITY CAL
This item is used to configure the emissivity correction settings.
Fig A: Item selection mode
How to operate
1. Select a desired item using H Temp(Up) or L Temp(Down) of the joystick button.
2. Pressing CENTER of the joystick button with an item selected will enter the setting mode (see
Fig B, C, D and E).
3. Pressing CENTER in the setting mode will return to the item selection mode.
4. Selecting “BACK” and pressing CENTER will return to the higher-level menu.
5. Press the MENU button to exit from the menu screen.
95691-2935-0000
Fig B: Setting mode (COMPENSATION VALUE)
Setting compensation value
Select “COMPENSATION VALUE” in the item
selection mode (Fig A) and press CENTER to enter
the setting mode (Fig B).
1. Change the digit using NEAR(Left) or FAR(Right).
2. Edit the numerical value using H Temp(Up) or
L Temp(Down).
3. Pressing CENTER will return to the item selection
mode.
Setting with emissivity table
Select “EMISS” in the item selection mode (Fig A)
and press CENTER to enter the setting mode. The
list of setting items will be displayed (Fig C).
1. Move the page using NEAR(Left) or FAR(Right).
2. Select a desired item using H Temp(Up) or
L Temp(Down). Pressing CENTER will validate
the value of selected item for emissivity and return
to the item selection mode.
3. Selecting “BACK” and pressing CENTER will
return to the item selection mode without setting
emissivity.
Fig C: Setting mode (Emissivity table)
4-30