InfRec Thermo Gear G100, Руководство по эксплуатации

Страница: 50 / 141

Chapter3 Shortcut
<Shortcut – point cursor>
This function is used to set the display to ON/OFF and move the coordinates for point cursors up to five points
(a-e).
(124,102)
e : OFF e : OFF
d : OFF d : OFF
c : OFF c : OFF
b : OFF b : OFF
a : 12.3 a : 12.3 a : 12.3
X : 30.0
Press
CENTER
X : 30.0
Press
CENTER
X : 30.0
M : 78.7 M : 78.7 M : 78.7
M-X: 48.7 M-X: 48.7 M-X: 48.7
(1) Normal mode
Cursor: not displayed
Background: semitransparent (2) Selecting item
Cursor: orange
Background: gray (3) Setting
Cursor: blue
Background: gray
(1) Selecting item
Select a point cursor (a, b, c, d or e) you want to set using H Temp(Up) or L Temp(Down) of the
joystick button.
With a point cursor selected, hold down CENTER of the joystick button to change the display
setting (ON/OFF).
Also, pressing CENTER allows you to set the coordinates.
If the display is OFF, change it to ON to set the coordinates.
(2) Changing coordinates
You can change the X and Y coordinates using H Temp(Up), L Temp(Down), NEAR(Left) or
FAR(Right).
Pressing CENTER will return to the item selection.
Notes
•
For coordinates within three dots from the outer edge, temperature readings are out of the
specifications.
•
For a point with the display set to OFF, information is not displayed in the normal mode. When
shortcut functions are enabled, the information is displayed and you can change the setting.
•
Coordinates of a selected point are indicated in the upper left of the screen (above the point e
information).
•
Emissivity and ambient temperature for a point cursor cannot be set with the shortcut. Set these items
from the menu screen.
•
Information display near a cursor cannot be set with the shortcut. Set it from the menu screen.
3-3
95691-2935-0000