InfRec Thermo Gear G100, Руководство по эксплуатации

Страница: 88 / 141

Chapter 4 Advanced
◎
MEASURE – MOVING IMAGE *
G120 only
Set frame rate & number of frame for moving image saving.
Total recording time is
calculated, based on
above “FRAME RATE”
and “FRAME TO SAVE”
Fig A: Item selection mode
Notes
Only when “SAVE MODE” is “MOVING IMAGE” and FRZ is executed on the camera, you can come
into this setting mode of moving image saving.
How to operate
1. On Figure A: selected item is moved when you move joystick H Temp(Up) / L Temp(Down).
2. On Figure A, selected item is changed to setting mode. Please press joystick CENTER to
decide the item to set up. (Refer to Figure B & C)
3. On Figure B, frame rate is changed when you move joystick H Temp(Up) / L Temp(Down).
4. On Figure C, selected digit is changed when you move joystick NEAR(Left) / FAR(Right).
5. On Figure C, setting value is changed when you move joystick H Temp(Up) / L Temp(Down).
6. On Figure B & C, press joystick CENTER to confirm and come back to Figure A.
7. On Figure A, select “BACK” and press joystick CENTER to come out to the previous layer.
8. Press MENU button, and then menu screen is closed.
Figure B : Setting mode (FRAME RATE) Figure C: Setting mode (FRAMES TO SAVE)
95691-2935-0000
4-28