InfRec Thermo Gear G100, Руководство по эксплуатации

Страница: 67 / 141

Chapter 4 Advanced
(5) To facilitate you to move the camera angle neatly and constantly to a certain fixed direction, the
guiding mark (triangle) starts moving towards the left. Please make sure to keep the guiding mark
aligned with the original reference point while you swing the camera. Please follow the direction
indicated with a white arrow to move the field of view. Keep the same and consistent speed as
the guiding mark moves.
Guiding Grid for PANORAMA
(4) After approx. 2 seconds passes, the message disappears and Grid with triangle to guide
PANORAMA shooting will be displayed.
* When “SWING DIRECTION” is set to “BT
TO TP” (vertical), the guiding grid is
displayed vertically across the screen. Please
refer to P.4-29 to see how to change Swing
Direction.
* When “SWING DIRECTION” is set to “BT
TO TP” (vertical), the guiding grid is
displayed vertically across the screen. Please
refer to P.4-29 to see how to change Swing
Direction.
* Please keep REC/FRZ pressed further here.
Please move the angle to keep
the guiding mark aligned with
your reference point
Please follow the direction indicated
with the while arrow displayed
* When the guiding mark (triangle) goes off the
screen, it comes in again from the other end of
the screen. Thus, please find a new reference
point quickly that is situated at the place of the
guiding mark again there.
Direction of movement of
the object being shot
Direction of movement
of guiding mark
REC Icon blinks while recording performed
(3) Press and hold REC/FRZ down to see the message shown as the LCD screen shot here. At this
point, please firmly hold the camera to stabilize the position i.e. field of view. If the camera
keeps moving to an excessive degree, this function won't work properly as intended.
DON'T MOVE,KEEP IT STILL
* Please keep REC/FRZ pressed.
* Please keep REC/FRZ pressed further here.
95691-2935-0000
4-7