InfRec Thermo Gear G100, Руководство по эксплуатации

Страница: 113 / 141

Chapter 4 Advanced
◎
SET UP
On the SET UP screen, select and set each of the following items (No.1 to No. 7, No.9 and No.10).
Save the configured items in No. 11 and No. 12. To initialize the saved values, perform No. 13.
№
Item Description
1 LANGUAGE
Sets the language displayed on the main unit.
2 ALL CLEAR Turns On/Off of the display on the screen.
3
TIME ＆ DATE
Sets the time display format, the date setting, and the time setting.
(The date and time is not updated during the setting.)
4
TV SYSTEM
Sets the video output (NTSC/PAL).
(This setting is valid only for the video display.)
5
LCD BRIGHT
Sets the brightness of the LCD. (high/medium/low)
(This setting is valid only for the LCD display)
6 VOLUME
Set the volume level (large/small) for voice memo and alarm.
7 LASER POINTER
Sets the laser pointer output (ON/OFF).
8
EXECUTE ENERGY
SAVING
Enters the sleep mode.
(The LCD display and the external monitor output are turned off. The
pilot lamp lights in red.)
Press any key to cancel the mode.
9
AUTO SAVING MODE
Enters the sleep mode when no operation is made for the set time (5, 10,
or 15 minutes).
(OFF, 5, 10, or 15 minutes)
Press any key to cancel the mode.
10
AUTO SHUTDOWN
Automatically turns off the power when the set time (5, 10, or 30
minutes) passes in the sleep mode (OFF, 5, 10, or 30 minutes)
(The set value is valid when the camera is in the power saving mode.)
11
SAVE CONFIG
Saves the current camera settings.
(To make the user setting valid, restart the camera after setting "user
settings" for "Setting at startup".)
12
STARTUP CONFIG
Selects the camera settings (settings when the power is off (initial value)
or user settings) at a startup.
If "user settings" is not selected, the initial value is used at a startup.
13 INITIALIZE Restores the default camera settings.
14 VERSION Displays the versions of FW, FPGA, etc.
95691-2935-0000
4-53